GET LATEST PRICES

CONTACT US

BRISBANE - Ph 1300 845 278 - Email: info@climatehvac.com.au

IT'S NOT A CHOICE, IT'S THE LAW

Under the new legislation, every Queensland residence will need to be fitted with photoelectric, interconnected smoke alarms in all bedrooms as well as hallways orbetween areas containing bedrooms.

From 1 January 2017

When replacing smoke alarms, they must be of a photoelectric type which complies with Australian Standard (AS) 3786-2014.

Existing smoke alarms manufactured more than ten years ago must be replaced. (Note: Smoke alarms should have the date of manufacture stamped on them.)

Smoke alarms that do not operate when tested must be replaced immediately.

Existing hardwired smoke alarms that need replacement must be replaced with a hardwired smoke alarm.

From 1 January 2027

Smoke alarms in all dwellings must:

be photoelectric (AS 3786-2014); and
not also contain an ionisation sensor; and
be less than 10 years old; and
operate when tested; and
be interconnected with every other smoke alarm in the dwelling so all activate together.

Smoke alarms must be installed on each storey:

in each bedroom; and
in hallways which connect bedrooms and the rest of the dwelling; or
if there is no hallway, between the bedrooms and other parts of the storey; and
if there are no bedrooms on a storey at least one smoke alarm must be installed in the most likely path of travel to exit the dwelling.

Smoke alarms must be either hardwired or powered by a non-removable 10-year battery, or a combination of both may be allowed.